Fast-Fit rapid dry-area enclosure
Fast-Fit IPS Panels for Straightforward Washroom Refurbishments
Fast-Fit IPS panels are the rapid, value-led route for clearly defined dry-area WC, urinal and basin enclosures where the project needs standard finishes, simple access planning and a short manufacturing programme.
The Fast-Fit use case
This range works best when the contractor already understands the room and needs an uncomplicated service enclosure rather than a bespoke premium specification.
Defined dry-area scope
Best suited to staff toilets, offices, small refurbishments and other rooms without persistent wet exposure.
Standard colour choice
Three practical finishes simplify approval and coordination with the Fast-Fit cubicle range.
Pre-fitted framing route
Panels can be supplied on softwood frames with concealed Keku clips, reducing site assembly steps.
Simple sanitaryware runs
The range suits clear WC, urinal or basin layouts where aperture and access requirements are known.
Budget visibility
A standardised brief helps contractors control the IPS element of a cost-led refurbishment.
Rapid programme potential
Straightforward approved orders can move quickly when dimensions and service positions are complete.
Fast-Fit suitability test
Use this table before choosing the rapid range. A quick product is only useful when the room conditions and drawings are suitable.
| Project condition | Fast-Fit response | Choose another route when |
|---|---|---|
| Dry staff or office WC | A practical option for simple service concealment | The room has shower use or persistent humidity. |
| Known sanitaryware positions | Allows apertures and access faces to be prepared efficiently | Cisterns, frames or service centres are still undecided. |
| Standard colour accepted | Supports the short approval process | The design requires a broad bespoke finish palette. |
| Light-to-moderate duty | Can suit appropriate everyday commercial use | Very high public traffic or impact risk changes the duty. |
| Straight walls and clear ends | Keeps the enclosure uncomplicated | Multiple corners, unusual returns or complex interfaces dominate the layout. |
| Confirmed access points | Supports removable panels where needed | The maintenance strategy has not been established. |
What must be confirmed before the rapid clock starts
Incomplete measurements or late sanitaryware changes can remove the programme advantage. Confirm the following with the contractor before ordering.
- Finished wall-to-wall dimensions
- Panel height and duct depth
- WC, urinal or basin centres
- Cistern and frame details
- Required apertures
- Number and position of removable faces
- Visible end panels
- Chosen standard colour
- Quantity of repeated layouts
- Site delivery postcode
- Required delivery date
- Named person approving the final scope
Keeping a Fast-Fit order genuinely fast
Freeze the layout
Sanitaryware, dimensions and access points are confirmed before manufacture.
Select a standard finish
The available Fast-Fit colour is approved without a bespoke sampling cycle.
Approve the quotation
Quantities, components, delivery and lead time are accepted.
Prepare the site
The contractor checks walls, floors and services before the components arrive.
Speed comes from reducing uncertainty
The Fast-Fit advantage is not created by omitting technical information. It comes from using a standard, dry-area route on a project where the dimensions, sanitaryware and access points are already settled. A complete brief allows the manufacturing scope to be understood quickly.
Where the drawing is still changing, the room is wet, the colour scheme is bespoke or the service wall contains unusual corners and interfaces, a made-to-measure Volante or Mirage review may produce a more reliable result even if its initial programme is longer.
Fast-Fit refurbishment examples
Examples of practical service concealment for clearly defined, cost-led washroom layouts.
Fast-Fit IPS ordering FAQs
What is the Fast-Fit IPS range intended for?
It is intended for straightforward dry-area commercial washroom refurbishments with standard finishes, known dimensions and uncomplicated service layouts.
Is 48-hour delivery guaranteed for every order?
No. Rapid turnaround depends on standard material availability, confirmed dimensions, order approval, quantities and delivery arrangements. The quoted programme is the controlling commitment.
How many colours are available?
The Fast-Fit route uses three practical standard colour choices intended to simplify selection and speed up approval.
Can Fast-Fit panels be used in shower or pool areas?
They should not be assumed suitable for persistent wet or humid conditions. Compare the Mirage compact-laminate route for demanding wet areas.
What sanitaryware can the panels be used around?
The system can be reviewed for WC, urinal and wash-hand-basin service zones where dimensions, apertures and maintenance access are clearly defined.
Are access panels included?
Required removable faces can be planned, but their number and positions must be agreed from the service layout before manufacture.
Can Fast-Fit IPS coordinate with cubicles and vanity units?
Yes. Standard finishes can coordinate with Fast-Fit economy cubicles and the Fast-Fit vanity route.
Who installs the panels?
Total Cubicle Solutions supplies the approved components. The customer’s contractor completes installation and final site setting-out.
Keep the rapid refurbishment package consistent
- Fast-Fit economy cubicles — coordinate the standard cubicle route
- Fast-Fit vanity units — match the basin area
- Volante IPS panels — compare a broader dry-area finish choice
- Mirage SGL IPS panels — upgrade wet or intensive-use rooms
Written and reviewed by the Total Cubicle Solutions Technical Team. Last reviewed 27 July 2026. Manufactured in Liverpool and supplied throughout the UK by GPG Sales Limited, company number 04099656.
Is your IPS layout ready for Fast-Fit?
Send the frozen dimensions, sanitaryware positions, access requirements and preferred standard colour for a programme check.