Volante dry-area service panelling
Volante IPS Duct and Back Panels for Commercial Interiors
Volante IPS panels provide a coordinated dry-area route for concealing WC, urinal and basin services in offices, retail premises, schools and general commercial fit-outs where finish choice and orderly access are important.
Why designers choose Volante for dry washrooms
Volante focuses on coordinated finish choice and practical service concealment rather than wet-area performance.
A broader finish palette
The range supports design-led colour coordination across dry-area cubicles, IPS faces and vanity units.
Neat service zones
WC cisterns, pipework, valves and basin services can be concealed behind an organised panel elevation.
Maintenance planning
Access faces can be positioned around the items the building team expects to inspect or replace.
Refurbishment flexibility
Open-ended, freestanding and wall-to-wall arrangements can be reviewed around existing room constraints.
Commercial cost control
The dry-area board route avoids paying for compact laminate where the room conditions do not require it.
Package consistency
Matching Volante products give contractors one coordinated visual language across the washroom.
Planning a Volante service wall
The visible elevation and the concealed services should be designed together so that colour, access and sanitaryware positions align.
| Layout topic | What to confirm | Volante outcome |
|---|---|---|
| Room condition | Dry commercial use and normal cleaning exposure | Confirms that the Volante material route is suitable. |
| Panel rhythm | Sanitaryware centres, joints and removable faces | Creates a balanced elevation rather than arbitrary panel widths. |
| Duct depth | Cisterns, frames, wastes and pipe clearance | Ensures the enclosure is deep enough without using unnecessary floor area. |
| Ends and corners | Wall-to-wall, open-ended or freestanding conditions | Determines return panels and visible edge treatment. |
| Finish schedule | Cubicle, IPS and vanity colours | Allows the whole dry-area package to be approved together. |
| Maintenance route | Items requiring periodic access | Prevents service points being trapped behind fixed sections. |
Volante drawing and finish checklist
A concise set of drawings and finish decisions is usually enough to prepare an accurate dry-area IPS quotation.
- Room plan and front elevations
- Sanitaryware centres and types
- Panel run lengths and heights
- Proposed duct depth
- Wall-to-wall or open-ended arrangement
- Required access panels
- Cubicle and vanity colour references
- Visible ends and corner details
- Cleaning and humidity conditions
- Quantity of rooms or repeated layouts
- Delivery location
- Fit-out programme
How a Volante IPS package is developed
Set the panel rhythm
Joints and access faces are aligned with the sanitaryware.
Confirm the room is dry
The proposed material is checked against actual exposure.
Coordinate the palette
Cubicles, IPS and vanity finishes are approved together.
Manufacture to the brief
Panels and framing are prepared for the contractor’s installation sequence.
Use colour to organise the washroom, not just decorate it
Volante gives project teams more freedom to distinguish doors, pilasters, vanity fronts and service panels within a dry commercial washroom. The IPS face can either recede into the wall palette or become a deliberate contrasting plane behind the sanitaryware.
For multi-room office or retail schemes, a consistent base colour can be paired with different accent finishes by floor, department or user area. Physical samples should be approved under the project lighting before the final order because screen previews cannot show texture or colour accurately.
Volante dry-area IPS examples
Examples showing how the service wall can coordinate with modern commercial washroom finishes.
Volante IPS planning FAQs
Where should Volante IPS panels be used?
Volante is intended for suitable dry commercial washrooms such as offices, retail premises, staff facilities, education rooms and general fit-outs without persistent water exposure.
What is the difference between a duct panel and a back panel?
A duct panel forms the accessible face of a service enclosure, while a back panel may line or finish the area behind sanitaryware. The exact arrangement depends on the room and service design.
Can Volante IPS match Volante cubicles?
Yes. The finish schedule can coordinate IPS panels with Volante toilet cubicles and vanity units.
Can the panels be supplied for WC, urinal and basin areas?
Yes. Separate or combined service runs can be developed for WCs, urinals and wash-hand basins.
When should Mirage be specified instead?
Use the Mirage SGL route where direct water, persistent humidity, intensive cleaning or higher impact risk makes a dry-area board unsuitable.
What access information is required?
Identify cisterns, valves, traps, meters and other items that need maintenance so removable faces can be positioned correctly.
Does Total Cubicle Solutions install Volante IPS?
No. The agreed panels and components are supplied for installation by the customer’s contractor or fit-out team.
Why is a drawing-based quotation used?
Panel widths, apertures, access faces, ends, quantities, finishes and delivery requirements all change the manufacturing scope.
Build a coordinated dry-area package
- Volante toilet cubicles — match the cubicle finish schedule
- Volante vanity units — coordinate the basin elevation
- Volante colour options — preview and request samples
- IPS panel overview — compare every material route
Written and reviewed by the Total Cubicle Solutions Technical Team. Last reviewed 27 July 2026. Manufactured in Liverpool and supplied throughout the UK by GPG Sales Limited, company number 04099656.
Need a coordinated Volante service wall?
Send the room elevations, sanitaryware centres and colour references for a dry-area IPS quotation.